The fibers, are positioned in a loose tube made of a high modulus plastic. The interstice inside and outside of the tubes are filled with a water-resistant filling compound. A steel wire, coated with polyethylene if necessary locates in the center of core as a strength member. Tubers (and fillers) are stranded around the strength member to form a compact and circular cable core. The plastic coated aluminum tape is wrapped over the core and extruded into a polyethylene sheath to form a cable.
Full section water blocking construction, provide good performance of moisture-proof and water resistance;
Special filling gel filled loose tubes provide perfect optical fiber protection.
Corrosion resistance phosphate steel wire with high modulus as central strength member.
The flexible buffer tubes are easily to route in closures.
Excellent mechanical and temperature performance.
Jacket provide superior protection against UV radiation, fungus, ,abrasion and other environmental factors.
Strict craft and raw material control enable lifespan over 30 years.
Application: long haul and building network communication;
Installation: duct/aerial;
Operating temperature: -40~+70℃;
Bending radius: static 10*D/ Dynamic20*D.
Fiber count | Nominal diameter (mm) |
Nominal weight (kg/km) |
Max fiber per tube | NO.OF(Tubes +filler) | Allowable tensile load (N) (short term/long term ) |
Allowable crush resistance (N/10cm) (short term/long term ) |
2~30 |
9.7 |
90 |
6 |
5 |
1500/600 |
1000/300 |
32~36 |
10.3 |
109 |
6 |
6 |
1500/600 |
1000/300 |
38~60 |
10.8 |
119 |
12 |
5 |
1500/600 |
1000/300 |
62~72 |
11.5 |
145 |
12 |
6 |
1500/600 |
1000/300 |
74~96 |
13.5 |
175 |
12 |
8 |
1500/600 |
1000/300 |
98~120 |
14.8 |
209 |
12 |
10 |
1700/600 |
1000/300 |
122~144 |
16.6 |
249 |
12 |
12 |
2000/600 |
1000/300 |
146~216 |
16.7 |
254 |
12 |
18(2 layers) |
2000/600 |
1000/300 |
218~288 |
19 |
325 |
12 |
24(2 layers) |
2500/600 |
1000/300 |
Special cables structures can be designed and manufactured on customer’s request